i-crafter i-Mend Cutting Deck 6x9 Inches
-
Description
A long-lasting cutting deck for your manual die cutting machine.
Use this self-mending cutting deck in place of one of your hard cutting decks and experience a new way of die cutting.
Sized to fit manual die cutting machines with a 6 inch wide opening.
Sandwich heights may vary, so adjust with shims as needed.
Place the i-Mend Self-Mending cutting deck on your machine cutting platform, place your craft material on top, place your die, blade side down, add one hard cutting deck on top and run this through your die cutting machine.
No more cracking sounds as it runs through the machine.
Use this self-mending cutting deck in place of one of your hard cutting decks and experience a new way of die cutting.
Cutting deck dimensions are 6 ⅛ x 9 inch {15.32cm x 22.5cm}. Sized to fit manual die cutting machines with a 6 inch wide opening. Sandwich heights may vary.
Flip and rotate the Decks as you work especially if you are doing large quantities of die cutting.
Start by using the least amount of pressure. Begin with the basic sandwich required per the machine manufacturer’s instructions.
If you still need more pressure, add a shim and repeat with up to three passes.
Note: for intricate dies, we recommend i-Crafter hard, translucent cutting deck.
Avoid exposing the i-Mend Deck to heat.
This self-mending cutting deck heals itself and cuts smoothly.Clean the i-Mend Deck with cold water and gentle scrubbing to remove small bits of paper left behind.
-
Warranty
Yes, AU Warranty for Parts only
-
Specifications
SKU I222101 Barcode # 850012091790 Brand i-crafter Shipping Weight 0.2000kg -
Reviews
Crafter
By: Astrid Howell on 17 January 2022I bought one of these and it was so fantastic I bought 2 more. Well worth the money
Value for money
By: Margaret Logan on 10 May 2021This is the best money you will spend! No more crunching sounds when you use your cutting machine and nasty marks on your work from scratched plates. It was so good that l had to order another 3 for my friends.
I-mend cutting deck
By: Julie Alexander on 12 April 2021I have had the I-mend cutting deck for over a month. I used it with a new top plate and magnetic base plate in a big shot. It’s amazing. Cuts are clean with all brands of dies no matter how intricate they are. All plates are still flat, no warping.
i-Mend Cutting Deck
By: Amanda on 31 March 2021Not quite what I expected. It still scars, just not as deeply as my usual cutting deck.
i-crafter i-Mend Cutting Deck 6x9 Inches
By: Jennifer Pizey on 18 March 2021This is awesome. I have only used it a few times as I am very busy, But, the paper cuts nicely and usually I have had to use a shim with my ordinary plates and run the dies through my big shot a few times, but no longer, one run through and the card is cut.